Mar-Jac Poultry Feed Mill
Spruce Pine, Alabama
Younglove first worked for Mar-Jac in Maysville, Georgia, in 2004; and we're pleased to be teaming up with them again on this exciting project! This all-concrete feed milling facility will include a receiving tunnel with both rail and truck pits; slipformed mill tower and silo six-pack for grain and soy meal storage; and tilt-panel grinder room, receiving building, boiler room, and warehouse.
ADM Ag Services Premix Facility
This new premix facility will consist of a slipform ingredient/process tower 56-foot wide by 86-foot long by 158-foot tall. The project includes a receiving building and loadout facility adjacent to this tower. The process tower is to tie in to the existing warehouse for bagging and tote equipment, which is also included in our scope. Ancillary buildings include electric rooms, a tank farm, nano ingredient rooms, and bathrooms and a break room inside the warehouse.
NEW Cooperative Feed Mill
NEW Cooperative has chosen Younglove to build their second feed mill in two years. This facility will be identical to the new facility in Pomeroy, Iowa, and will consist of a 40-foot by 92-foot by 162-foot-tall slipform structure. The mill will consist of 26 ingredient bins and a dual loadout system. The ancillary buildings will be of tilt-panel construction and will include the mechanical room, loadout extension, receiving building, and warehouse. This facility will be built onto an existing facility with grain storage capacity.
ADM Feed Mill
ADM has selected Younglove to provide design-build services for a second feed mill project in Quincy, Illinois, to replace their existing plant. This project is a full-line commercial feed mill with three mixing lines, three pelleting lines, two pug mill lines, three bagging lines, a tub press line, and bulk loadout via dual 4-ton weigh lorries. The 75' x 100' x 156' tall custom mill tower is of concrete slip form construction. The mill is surrounded by a large micro/macro ingredient area, receiving building, and bagging warehouse.
Cooperative Farmers Elevator Feed Mill
Younglove has been selected as the design/builder for a new swine feed mill by Cooperative Farmers Elevator (CFE) in Ocheyedan, Iowa. The main features of the mill include 1,749 tons of storage in 22 bins, 480 tons of mixed feed capacity in 6 bins, 2,336 tons of loadout storage in 24 bins, one 300-ton-per-hour receiving line, 12-ton batching and mixing system, hammermill and rollermill grinding, 1 initial pelleting line with 2 future lines, and a dual loadout bay.
Costco Wholesale Corporation Feed Mill
Costco Wholesale selected Younglove as the design/builder for their feed mill in Fremont, Nebraska. The facility features 3 truck receiving lines, 400,000 bushels of grain storage, 2,500 tons of ingredients in 21 bins, 400 tons of mixed feed in 4 bins, and 3,350 tons of finished feed in 22 bins. Systems include three receiving lines at 375 tons each, hammermill (110 tons per hour) and rollermill (40 tons per hour) grinding, 10-ton dual-shaft mixer, two 75-ton-per-hour pelleting lines, and dual feed loadout bays with weigh lorry scales.
ADM Ag Services Flour Mill and Grain Silos
ADM has selected Younglove to provide design/build services for a 30,000 cwt flour mill and grain storage facility. The grain storage facility consists of a 20-pack of slipform concrete silos equipped with steel cone hopper bottoms to hold approximately 2,325,000 bushels of wheat and truck/rail receiving systems. The flour mill consists of a slipform building approximately 232-foot by 84-foot by 139-foot tall plus a 66-foot by 60-foot x 85-foot tall truck loadout building.